Gigabit Fiber to Ethernet Media Converter - 80km - 1000TX to 1000FX - Singlemode

Gigabit Fiber to Ethernet Media Converter - 80km - 1000TX to 1000FX - Singlemode
US$293.75

This Gigabit media converter supports two types of media for network connections such as 1000Base-T and 1000Base-SX/LX fiber. The media converter is used to convert one type of media signal to another equivalent type, this allows the two segments to be connected easily and inexpensively. The fiber to ethernet media converter can be used as a standalone unit or as a slide-in module to the 19" converter rack (up to 16 units) for use at a central wiring hub.

 A media converter is merely a device that can be plugged in and operated, but when connected to the network it must take account of certain factors. In accordance with the media converter port, the end face of the fiber patch cable should be the same. Ensure that wavelengths and speed rates are identical at both ends of the media converter. Be precise as to whether the converter supports full-duplex or half-duplex transmission and make sure to maintain the operating temperature range. Installation of a media converter should be done in a flat, secure location. Make sure that there's enough room for ventilation around the converter.

Since the use of two fiber media converters in a network is more common, one medium converter must be used for interconnections between copper cable and fiber devices. To connect two copper cable systems, it is often necessary to use a series of fiber media converters to extend the distance.

 


Gigabit Fiber to Ethernet Media Converter Features & Specifications

  • Easy Integration
  • Cost Effective
  • Auto MDI/MDI-X support on RJ-45 Port
  • Auto polarity correction on RJ-45 Port
  • Local and Remote loopback test for the first-time installation and troubleshooting
  • Compatible with other Gigabit 1000Base-T/SX/LX devices
  • Status LEDs for easy monitoring of device status
  • Compliant with IEEE802.3ab 1000Base-T and IEEE 802.3z Base-SX/LX Standards
  • FCC Class A & CE approved

 

Connector:   SFP

Maximum Distance:   80km Single-mode
Input Power:    2A +5V, Comes with 115V Adapter

Operating Temperature:  0~70°C

Height:  26.2mm

Width:  81mm

Depth:  105mm